Equipment

Harness

For climbing, your harness must have at least two hard points; you must tie in through both.
For belaying, your harness must have at least two hard points connected by a belay loop.

Belay Device

GriGris are already placed on every top rope route in the facility.

For lead climbing, you'll need to bring your own device in the GriGri family.

The Edelrid Ohm is not permitted.

Rope & Draws

For leading, you'll need a rope that is at least 35m in length.

You'll need at least 8 quickdraws; draws are not pre-placed on all lead routes!